Emaux SPV150 Variable Speed Energy Saving Pump
Emaux SPV150 Variable Speed Energy Saving Pump

Emaux SPV150 Variable Speed Energy Saving Pump 1.5HP

Write a Review
Your Price: ฿27,500
Part Number: SPV150

Emaux SPV150 Variable Speed Energy Saving Pump 1.5HP

For residential pools and water features

3 Speeds Setting

  • 1500 RPM at 2 m head 9 m3/h
  • 2400 RPM at 6 m head  13 m3/h
  • 3400 RPM at 10 m head 20 m3/h

Maximize Hydraulic Performance

Motor Advantages
Features
  • Permanent Magnet Motor (PMM), Totally Enclosed Fan Cooled (TEFC)
  • Pump casing ABS + % glass filled, Impeller PPO (SABIC) Strainer basket and base in PP + % Glass-filled
  • Motor shaft SS316, Seals bellows-EPDM stationary face-SIC rotating face-Graphite Spring-SS316
  • Super Quiet Operation when running at the low RPM mode
  • Designed and constructed to maximize the pump’s hydraulic performance
  • One touch controller, the total control in your finger, pre-set speed programs, schedules, to have the most efficient pool, spa or any water feature connected
  • Compatible with the future, LMCnet® (Emaux wireless management system)

Emaux Super-Power Series Variable Speed Pump provides the best energy saving solution from over-usage and to increase efficiency and reduce maintenance cost. Traditional single speed pump runs at maximum load continuously. It is inefficient and leads to a higher running cost compare to Emaux Super-Power Variable Speed Pump. Reduced speeds (rpm) provide a slower water circulation rate that put less strain on the complete installation such as filtration, sanitation, and plumbing. It reduces the wear and tear factor and resulting in a cost saving to the pool owner.

Emaux Super-Power Variable Speed Pump utilized the latest Permanent Magnet Motor (PMM) technology, it produces a magnetic field between the rotor and winding. The energy saving is derived from the ability to reduce the RPM of the motor itself. The standard motor consumes electricity to induce the magnetic field into the rotor; on the other hand, PMM motor gains efficiency by the magnets working to spin the rotor, which achieves energy cost saving up to 80%. The design of (Totally Enclosed Fan Cooled) TEFC Motor would also increase the reliability and durable for all weather condition. The motor shaft and shaft seal are AISI316 will also ensure it is reliability and applicable to salt water pools.

12 Months Manufacturers Warranty


Available from our swimming pool shop in Pattaya or delivery to your door anywhere in Thailand via EMS

TOP